<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>好牛图创 - 布线设计</title>
    <link>https://okoxox.com/forum-52-1.html</link>
    <description>Latest 20 threads of 布线设计</description>
    <copyright>Copyright(C) 好牛图创</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Thu, 09 Apr 2026 13:24:18 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://okoxox.com/static/image/common/logo_88_31.gif</url>
      <title>好牛图创</title>
      <link>https://okoxox.com/</link>
    </image>
    <item>
      <title>单芯电缆线在Proe中布线设计运用</title>
      <link>https://okoxox.com/thread-120-1-1.html</link>
      <description><![CDATA[（1）打开组建dianqigui.asm，应用程序——电缆，进入布线模式。将模型树转换到层树，找到PINGBIBAN，右击——隐藏。此例，将会将图3-1-1的端子1和2连接起来。
图3-1-1 进入布线模式（2）创建harness，“插入——线束”或，命名为H_DUANZI
（3）创建spool，“插入—— ...]]></description>
      <category>布线设计</category>
      <author>卡卡</author>
      <pubDate>Fri, 12 Jan 2018 03:02:23 +0000</pubDate>
    </item>
    <item>
      <title>多芯电缆线在Proe中的布线设计实例</title>
      <link>https://okoxox.com/thread-119-1-1.html</link>
      <description><![CDATA[图3-2-1 为方便描述，将端子命名，如上图3-2-1。 
（1)打开组建dianqigui.asm，应用程序——电缆，进入布线模式。将模型树转换到层树，找到PINGBIBAN，右击——隐藏。此例，将会将图3-2-1的端子1、2、3分别和端子4、5、6连接起来。 
（2）创建harness，“插入——线束 ...]]></description>
      <category>布线设计</category>
      <author>卡卡</author>
      <pubDate>Fri, 12 Jan 2018 02:36:44 +0000</pubDate>
    </item>
    <item>
      <title>扁平线在Proe布线设计中的实例运用</title>
      <link>https://okoxox.com/thread-118-1-1.html</link>
      <description><![CDATA[（1）打开组建dianqigui.asm，应用程序——电缆，进入布线模式。此例，将会将如下图的端子1和2连接起来。
图3-3-1（2）创建harness，“插入——线束”或，命名为H_FLAT。
（3）创建spool，“插入——线轴”或，“create（创建）——ribbon（带）”，
如图。命名为“f ...]]></description>
      <category>布线设计</category>
      <author>okoxox</author>
      <pubDate>Thu, 11 Jan 2018 10:19:14 +0000</pubDate>
    </item>
    <item>
      <title>三维布线设计如何在接线端口处加坐标系</title>
      <link>https://okoxox.com/thread-117-1-1.html</link>
      <description><![CDATA[首先介绍布线中涉及的各种术语。
一、连接器 
    在我们用到的电缆中，大体可以分为3类，即单芯电缆、多芯电缆和扁平线，在proe布线模块中也是这样分类的。在没有布线之前先看一下连接器，因为proe布线就是将要布置的线缆先与连接器连接，然后布置路径。所谓连接器就 ...]]></description>
      <category>布线设计</category>
      <author>okoxox</author>
      <pubDate>Thu, 11 Jan 2018 09:22:03 +0000</pubDate>
    </item>
    <item>
      <title>三维布线设计在Proe中的实际运用教程</title>
      <link>https://okoxox.com/thread-116-1-1.html</link>
      <description><![CDATA[以下图为例。
方法：
1.打开组建diannaobuxian.asm，点击【应用程序】——【电缆】，进入布线模式。
2.创建线束，点击，命名为wangxian，取消使用缺省模板，使用mmns_part_solid。
3.创建线轴，点击，选择【创建】，选择【电线】，命名为“10_blue”，意思是直径10m ...]]></description>
      <category>布线设计</category>
      <author>okoxox</author>
      <pubDate>Thu, 11 Jan 2018 09:13:59 +0000</pubDate>
    </item>
    <item>
      <title>Proe中怎样三维布线多芯电缆的做法</title>
      <link>https://okoxox.com/thread-115-1-1.html</link>
      <description><![CDATA[以下图为例。
方法：
1.打开组件，点击【应用程序】——【电缆】，进入布线模式。
2.创建线束，点击，命名自定，取消使用缺省模板，使用mmns_part_solid。
3.创建线轴，点击，选择【创建】，选择【电缆】，命名为自定。
4.在弹出的电气参数对话框中，我们就可以定 ...]]></description>
      <category>布线设计</category>
      <author>okoxox</author>
      <pubDate>Thu, 11 Jan 2018 08:56:02 +0000</pubDate>
    </item>
    <item>
      <title>扁平线在Proe中三维布线设计运用</title>
      <link>https://okoxox.com/thread-114-1-1.html</link>
      <description><![CDATA[方法：
1.打开组件，点击【应用程序】——【电缆】，进入布线模式。
2.创建线束，点击，命名自定，取消使用缺省模板，使用mmns_part_solid。
3.创建线轴，点击，选择【创建】，选择【带】，命名为自定。
 4.在弹出的电气参数对话框中，我们就可以定义电缆的一些参数 ...]]></description>
      <category>布线设计</category>
      <author>okoxox</author>
      <pubDate>Thu, 11 Jan 2018 08:37:13 +0000</pubDate>
    </item>
  </channel>
</rss>